Description
When built-in temperature control is not needed, Excella open-air shakers are the solution. Ruggedly-built for use on the bench, in an incubator, or in a warm- or cold-room, these shakers are available in three sizes. The Excella microprocessor controlled, heavy-duty counterbalanced drives provide years of continuous, quiet operation. Excella shakers are available with a large selection of accessories to accommodate a wide range of flasks, test tubes and general labware. Like most New Brunswick shakers, Excella platforms, clamps and accessories are interchangeable with earlier NBS models. All Excella shakers meet cETL, UL, CSA and CE standards. Microprocessor-controlled Excella model E10 accommodates flasks up to 6 L on a large 30 x 18" accessory platform.
More Info
 |
Microprocessor control panel:
- Provides intuitive operation, with easy to use controls
- Enables precise settings of speed and incubation temperature
- Self-Correcting technology automatically compensates for changes in workload, voltage, and temperature to maintain operator-programmed set-points
- Reduces operator error in establishing running conditions
- Large LED character display presents a menu of function / status readouts including speed, running time, self-diagnostic indicators and temperature
- Setpoint Retention maintains set-point during power interrupt and restarts shaker when power resumes
- Keypad is resistant to spills and can be easily cleaned
|
|
A Wide Variety of Platform, Clamp, and Accessory Options to fit your labs needs!
All New Brunswick shakers (enclosed and open air) do not come equipped with a platform and must be purchased separately. A wide range of interchangeable accessoryplatforms accommodate all your glassware. When using a singleflask size, dedicated platforms provide maximum capacity, andcome with clamps installed. Universal platforms let you mixdifferent-sized clamps and test tube racks for added versatility.
Universal platforms have multiple holes enabling you to mount an assortment of flask clamps or other accessories on a single platform. Universal platform, clamps and accessories are sold separately. (Clamps, test tube racks and sticky tape shown)
Dedicated platforms when just one size flask will be used on the shaker, (i.e., 250 mL flasks), dedicated platforms come with flask clamps already mounted. Dedicated platforms generally will hold a greater number of flasks than the universal platform, but do not offer the versatility.
|
| |
| |
|
Features
- Large-capacity benchtop shakers for agitating test tubes and flasks up to 6 L with digital control
- Heavy-duty, counterbalanced drive with DC brushless motor and permanently lubricated ball bearings provide a long life and is virtually maintenance-free
- Large, clearly visible 9/16" LED character display presents a menu of function / status readouts including speed, running time and self-diagnostic indicators
- Versatile 30 x 18 aluminum accessory platform (sold separately) accommodates flasks up to 6 L
- Agitation: 50 - 400 rpm, ± 2rpm
- Shaking orbit of 1" diameter circular orbit
- Accessory Platforms are interchangeable with those from other same-sized NBS shakers
- Self-correcting microprocessor controller automatically compensates for changes in workload and voltage to maintain operator-programmed setpoints.
- Audible and visible alarms additionally alert the user to setpoint deviations. Audible alarm can be muted.
- Unique acceleration/deceleration circuit eliminates wetting of flask closures which could interfere with oxygen transfer which also prevents sudden starts & stops
More Features
- Reference calibrations allow the shaker to be set manually for reproducible results from one run to the next
- Comprehensive warranty - two years for parts. Two years on labor - covering the entire machine, not just the drive.
- Certified. Meets cETL, UL, CSA and CE standards.
Specification
| | E10 |
|---|
| Platform size (W x D) |
30 x 18 in |
| Speed range |
50-400 rpm |
| Orbit diameter |
1 in |
| 10 mL Erlenmeyer capacity |
183 |
| 25 mL Erlenmeyer capacity |
92 |
| 50 mL Erlenmeyer capacity |
92 |
| 125 mL Erlenmeyer capacity |
39 |
| 250 mL Erlenmeyer capacity |
30 |
| 500 mL Erlenmeyer capacity |
18 |
| 1 L Erlenmeyer capacity |
12 |
| 2 L Erlenmeyer capacity |
8 |
| 2.8 L Fernbach capacity |
6 |
| 4 L Erlenmeyer capacity |
6 |
| 5 L Erlenmeyer capacity |
6 |
| 6 L Erlenmeyer capacity |
4 |
| Dimensions (W x D x H) |
30 x 27 x 8.5 in |
| Weight |
93 lb |
| Warranty |
2 years parts, 2 years labor |
| Power supply |
120 V, 60 Hz |
